• Norman Rasch posted an update 1 week, 5 days ago

    An ornamental molding can be defined as any continuous projection that is used to enhance the appearance of a wall. In ancient Greece, we were holding first used to throw water outside the wall. The contours, measurements, and projections of moldings vary greatly.


    One kind of molding – the frieze (or frieze board) – was initially applied to the Parthenon at the Acropolis. The frieze is considered element of the Greek architectural style.

    The Parthenon was developed for the goddess Athena. The frieze moldings that were used were meant to tell the tale of her conquer Poseidon in becoming the patron from the ancient city that’s now Athens.

    The frieze panels are a number of designed pediments which can be filled up with the pictures of Athena’s birth and rise to power. Today, a frieze board could be the flat panel just under a crown molding or cornice. Often, low relief is applied to this panel for added decoration.

    Today, frieze moldings are most common being a area of an ornamental molding that follows the neoclassical architecture or decorating style.

    You’ll need a pretty high ceiling (a minimum of 9 feet), and it’s smart to stain or paint the frieze as well as the crown molding exactly the same color. The frieze is a superb way to visually bring the ceiling down making the bedroom appear cozier.

    Crown Molding

    Crown molding is the most popular type of cornice molding. Crown molding generally is a single-piece of decorative molding, installed at the top of a wall, with an angle to the adjoining ceiling. However, I know of crown molding assemblies of 5 or maybe more pieces in elaborate settings.

    Crown molding often features a profile that projects out on the ceiling and down the wall, adding a refreshing appearance to a room. It’s used on top of cabinets or built-in furniture.

    Introducing this type of decorative molding to a not hard room gives a historic character that this room may not otherwise have. Crown molding can be in combination with other moldings to include details to fireside mantels and shelves. (For what it’s worth, this could be the best architectural feature).

    Crown molding can be a type of Cornice Molding. The term "cornice" describes molding installed across the the top of a wall or over of the question. If this treatment is made from multiple pieces of molding, method . a "build-up cornice." Another form of cornice molding could be the Cove Molding.

    Cove Molding

    Cove molding is very just like crown molding, with similar application and function. The difference forwards and backwards is in the profile. Cove molding includes a concave profile (which bows inward) while crown molding includes a convex (outward) profile.

    While crown is most at home in traditional settings, Cove moldings are equally comfortable in country, or even contemporary settings. You never normally see multi-piece assemblies of cove moldings. You can occasionally find it "beaded" at bottom and top for the little accent.

    Entries, formal living spaces, formal dining rooms, and master bedrooms usually receive decorative moldings with ornate or traditional patterns.

    Kitchens and other more functional parts of the property may be that you will see the greater design of the cove molding. In the past, coves and crowns have become smaller sized, but most still bear the styles and shapes with the original Greek and Roman designers.

    Chair Rail Molding

    A chair rail can be a decorative molding that divides a wall horizontally, usually about 32" to 36" over the floor. They protect the walls in places that damage might occur from people getting out of bed away from chairs.

    Because of this, greater traditional chair rails have a nosing in the center, with curved and beveled surfaces that taper time for the wall above and underneath the nosing.

    Today, chair rails remain a common detail in traditional interiors. They serve the decorating aftereffect of unifying various architectural information a place, for example door and window trim, and fireplace surrounds.

    Chair rail can also be used as being a cap for wainscoting or other wood paneling. This decorative molding adds a sense of detail and charm while achieving continuity inside a room by unifying the various decorative elements.

    Panel Molding

    Panel molding, commonly referred to as a picture frame molding, appears like a large empty frame, and is also often a part of designs on walls of old Colonial and, Georgian, and Early American homes. The location with this molding needs to be across the chair rail height leading to Ten to twelve inches down from the ceiling.

    How big such a decorative molding, measuring 1" to 3" in width, must be proportionate on the ceiling height from the room. Much like the other moldings, panel molding adds feeling of charm and delicate detail to a room.

    Wall framing appears in the Georgian amount of American architecture, when plaster begun to replace wood panels for the walls. Panel molding also is a good way to divide walls into large, great looking units, with no same tariff of full wall paneling.

    Another use of this versatile molding is always to trim openings produced by wider planks which are assembled as rails and fashoins. Often, the centers of such frames stay open. By making use of panel moldings round the perimeter of the opening, you develop the design of a photo frame.

    When this decorative molding is painted inside the same color because the surrounding walls, you achieve a sculptural quality with a wall, adding texture and shadows. If moldings are painted in contrasting colors, they could develop a striking three dimensional appearance, giving depth and dimension. This sort of treatment solutions are popular for staircases and entries.

    Baseboard & Base Molding

    Baseboard molding protects the bottom of the wall from ware and tear, while hiding openings and other irregularities the place that the wall meets a floor. Base moldings provide floor line a better profile, and is as elaborate or simple as you want.

    Whereas it really is easy to setup chair rail on a level plane, baseboard (like crown) could be tricky if your floors (or ceilings) are not level. Because of this, I propose obtaining a professional woodworker to the setting up these moldings.

    As you remedy to uneven floors, you’ll be able to install a "shoe molding" down the bottom front edge to get the baseboard a finished look. Something else that you can do with baseboard (as well as using the toe kick of the kitchen cabinets) is incorporate accent lighting.

    It is not consistent with the pure traditionalist, yet it’s a reasonably nifty way to have accent lighting round the perimeter of a room. You couldn’t do that until they made the small LED rope lights of today.

    Rope lights are available in different lengths and shades, and can be easily installed behind baseboard. Just make a notch in the back side with the baseboard, at the top, and run the rope lights in the notch.

    This is more frequently utilized in commercial spaces, but continues to be put in entries and hallways – especially in contemporary homes.

    Flexible Moldings

    When you have a curved wall or arch, you are able to sure enough have a great craftsman develop a curved molding for about 3 times the price tag on an upright molding. Or, you should buy a versatile molding for approximately around the same price since the straight one.

    These allow you to install moldings onto curved surfaces or arches, minus the delay and tariff of keeping them made out of wood. The stock profiles (you will find hundreds) is the same towards the rigid versions and they are compatible in terms of paint finish can be involved.

    For more info about
    moulding.vn see this useful web portal.